MIX CLEAR COAT 4:1 RATIO

SPRAY FIRST COAT MEDIUM TO WET. MAKE IT LOOK LIKE WHAT YOU WANT  THE FINAL COAT TO LOOK LIKE.

ENJOY GLASS LIKE SHINE, AMAZING FLOW OUT AND ZERO DIE BACK. APPLY WITH A 1.3MM OR 1.4MM FLUID TIP/AIR CAP

Video: Showing gloss of second coat of clear

Video: Showing application of first coat of clear

FAST MIX

SELECT ASB-S (OVERALL) ACTIVATOR.

BOTH THE SLOW AND FAST ACTIVATORS WILL CREATE A DUST FREE, HAND SLICK FINISH 45 MINUTES AFTER YOUR FINAL COAT.

MIX CLEAR COAT 4:1 RATIO

SELECT ASB-F (FAST) ACTIVATOR.

APPLY 2 OR 3 COATS. FLOW YOUR LAST COAT JUST A TOUCH HEAVIER TO ACHIEVE GLASS LIKE SHINE.

USE SLOW REDUCER IN YOUR BASECOAT FOR SMOOTH OVERALL PAINT JOBS.

OVERALL MIX

KEEP YOUR GALLONS OF CLEAR AND ACTIVATORS STORED AT AROUND 72 DEGREES. THIS WILL HELP WITH FLOW-OUT.

DO NOT USE A "TACK COAT" METHOD. ALL COATS NEED TO BE SMOOTH TO HAVE A SHOW CAR FINISH AS AN END RESULT.

SPRAY FIRST COAT MEDIUM TO WET. MAKE IT LOOK LIKE WHAT YOU WANT  THE FINAL COAT TO LOOK LIKE.

HELPFUL SUGGESTIONS

LET FLASH 4-8 MINUTES FOR ASB-F ACTIVATOR. RE-COAT WHEN STICKY TO TOUCH AND NOT STRINGY

Video: Showing gloss of fully cured  clear

LET FLASH 8-10 MINUTES FOR ASB-S ACTIVATOR. RE-COAT WHEN STICKY TO TOUCH AND NOT STRINGY

APPLY COATS WET ENOUGH TO ACHIEVE SMOOTH APPLICATION

THESE CRYSTAL CLEAR RESINS AND ACTIVATORS ARE DESIGNED TO FLOW "TOTALLY WET" FOR THE ENTIRE FLASH TIME PERIOD. YOU WILL NOTICE THIS EFFECT. AT THE END OF THE FLASH TIME PERIOD, THEY WILL "KICK" OVER ALMOST INSTANTLY AND ARE READY FOR NEXT COAT, WITHOUT THE "WORRY" OF A POSSIBLE SAG ON VERTICAL SURFACES.

APPLY 2 OR 3 COATS. FLOW YOUR LAST COAT JUST A TOUCH HEAVIER TO ACHIEVE GLASS LIKE SHINE.